- A comprehensive network test for voice, video, and data applications.
- Verification of USOC coaxial cables and TIA-568A/B UTP/STP twisted pairs with full cabling testing in accordance with IEEE 802.3ab in just 15 seconds.
- Detection of potential faults thanks to the integrated Time Domain Reflectometer (TDR) function. SIGNALTEK can also operate as a data logger, monitoring network performance over extended periods. This allows you to identify problems that cause inefficiency, such as network outages. SIGNALTEK also includes a range of
LAN diagnostic features, such as:
- The ability to ping various devices connected to the network (IP cameras, home automation devices, automation control panels, etc.).
- Configuration of static and dynamic (DHCP) IP addresses.
providing multiple IP addresses belonging to different devices
. Running tests is incredibly simple: just press the Autotest button and the SIGNALTEK will perform all the necessary tests without lengthy or complex configurations. Results can be saved to the instrument's 64MB of internal memory or to any external USB drive, guaranteeing unlimited storage. It is also possible to download the data to a PC or send it directly to a printer.
- Tests on 10/100/1000 Mbps networks
- Supports VoIP and Gigabit Ethernet applications
- Tests on UTP/STP cables with RJ45 connectors in CAT3/5E/6/6A/7
- Tests on audio/telephone cables with RJ11/RJ12 connectors
- Tests on 58-59/6 series coaxial cables
- Complete test on IEEE 802.3ab cables in 15 seconds
- Duration test for fault detection
- Supports static and dynamic IP testing
- Pass/Fail test execution
- Fully user-friendly interface
- Complete cable mapping
- Measures cable lengths up to 140 m
- Autotest function
- Integrated TDR function
- Internal memory for saving measurements
- USB interface for PC connection
- USB interface for serial printer connection
- 2.8" VGA color display
- Power supply: 8 x 1.5V AA LR6 alkaline batteries
- External mains power supply
CE - IEEE 802.3 - Ethernet - TIA 568B
Standard Equipment
- SIGNALTEK Display and Remote Unit
- 2 x RJ45 to RJ45 STP CAT5E patch cables, 30cm
- 2 x RJ45 to RJ11 patch cables, 60cm
- 2 x RJ45 coaxial “F” cables, 60cm
- 2 x RJ45 alligator clip adapter cables, 30cm
- 2 x coaxial “F” cable connection adapters - USB cable
- 8 x 1.5V AA LR03 alkaline batteries
- 2 x 120/240V power adapters with various sockets (model 33-975)
- Carrying case
- 2 x instrument straps
- Instruction manual on CD-ROM
Optional
- Complete SIGNALTEK cable set 1219-91-0003
- 120/240V power adapter 4010-00-0136
