Since dirt can be a problem before, during, or after fiber optic certification testing, affecting both ends of fiber optic connectors depending on the mating, both sides of the connection must always be clean and inspected. Furthermore, mating contaminated fiber optic connectors can cause permanent damage, as microscopic debris becomes trapped between the ends.
It is also necessary to inspect patch cords or connectors fresh from the factory, as the protective caps do not keep the ends of the fiber optic connectors clean. Preventing this common failure begins with inspecting the ends of the fiber optic connectors and removing any traces of dirt before inserting them into connectors or equipment.
The FI-7000 FiberInspector Pro is a fiber optic inspection instrument that allows you to inspect and certify fiber optic connection ends in 1 second so that the job is completed the first time.
With the FiberInspector Pro you will achieve:
- Automated PASS/FAIL certification of fiber optic terminations
- Graphical indications of problem areas due to contamination, holes, breaks and scratches
Certified to meet industry standards - IEC 61300-3-35.
Eliminate human subjectivity from fiber end measurements.
Save views of fiber optic connector ends during the certification process.
Versiv™'s modular design enables copper certification, fiber optic loss detection, OTDR testing, and fiber end inspection.
Take advantage of our current promotion to purchase the FI-7000 equipment under special conditions.
