As a result of optimizing the designs of the exterior dimension, roof material and rigidity, an improvement in installation, greater speed and therefore, a reduction in costs has been demonstrated.The optical fibers are protected by low-friction, flame-retardant polyethylene (LSZH), and the steel cable contains two wire reinforcement elements.
It is compatible with the minimum bend radius and is supplied with G.657A.
Key features:
- Low-friction jacket, with a friction coefficient more than 75% lower compared to conventional indoor cables. This allows for the installation of a greater number of cables in conduits already occupied by other cables.
- Easy to push through congested conduits, allowing the cable to be pushed directly into the conduit. Two steel wires act as tensioning elements, providing sufficient mechanical strength for the cable to be pulled or pushed through the conduit.
- Reduced diameter, with extremely small dimensions (2.2 x 1.8 mm), more than 40% smaller compared to conventional indoor cables.
-The cable is made of single-mode optical fiber with a low bend radius, based on ITU-T G.657.
-Easy removal of the outer jacket with standard tools.
