Specifically designed for FTTx network applications, especially where there are many existing cables and the conduit is congested.
As a result of optimizing the external dimensions, sheath material, and rigidity of the design, improvements in installation, increased speed, and therefore reduced costs have been demonstrated.
The optical fibers are protected by low-friction, flame-retardant polyethylene (LSZH), and the steel cable contains two wire reinforcement elements.
It is compatible with the minimum bend radius and is supplied with G.657A
Among its main features, we can highlight:
- Low-friction jacket, with a friction coefficient more than 75% lower compared to conventional indoor cables. This allows for the installation of a greater number of cables in conduits already occupied by other cables.
- Easy to push through congested conduits, allowing the cable to be pushed directly into the conduit. Two steel wires act as tensioning elements, providing sufficient mechanical strength for the cable to be installed by pulling or pushing it through the pipes.
- Reduced diameter, with extremely small dimensions (2.2 x 1.8 mm), more than 40% smaller compared to conventional indoor cables.
- The cable is manufactured from single-mode optical fiber with a low bend radius, based on ITU-T G.657.
- Easy removal of the outer jacket with standard tools.
