The new Oversize Cable Exits are designed to use a cable outlet of the next larger size on each connector.
This allows the connectors to accommodate larger diameter cables without the need for additional adapters.
The provided text does not specify the minimum or maximum diameters supported by each of the three sizes, so it is not possible to quantify the increased capacity compared to the standard outlets.
According to Yamaichi Electronics, the new outlets feature a one-piece construction and require no additional adapters or sealing elements.
The installation procedure remains the same as with the standard T-Series cable outlets. Therefore, the company states that incorporating the oversized version does not require modifying the assembly process used for the conventional variants.
The reduction in the number of parts also physically simplifies the assembly, although the manufacturer does not provide data on assembly times or failure rates to quantify this effect.
The Oversize Cable Exits are available for both male and female connectors in the family.
Yamaichi is targeting this expansion at industrial applications that need to integrate larger diameter cables while retaining the T-Series connectors.
The company also notes that the absence of additional components allows for a compact design, although the information provided does not include dimensions that would allow for comparison of the new outlets with other configurations.
Special M12 connectors for the food industry
The need to easily and thoroughly remove dirt from components is a primary requirement in the packaging and F&B industry. This applies to contact areas, as well as wet and dry areas.
