The assembly is performed using the mechanical splicing technique.
FOLAN pre-connectors are used for high-speed networks and for any other type of installation or maintenance.
They do not require investment in training or expensive tools.
Just remember the PIP rule, which consists of:
- Prepare the fiber: slide the boot along the cable. Cut and strip the cable according to the markings on the packaging. Clean and trim.
- Insert the fiber into the back of the connector and remove the connector body from the holder.
- Protect the fiber when placing the boot over the connector to avoid any damage.
Very easy to use, FOLAN pre-connectors can be assembled in just 1 to 2 minutes. A splicing operation typically takes 5 minutes and requires the use of a fusion splicer or connection tools that usually only work with connectors of the same brand.
FOLAN pre-terminated connectors guarantee high-quality connections using traditional tools (stripper, cutter).
Using FOLAN connectors ensures the best solution for achieving the optimal balance between quality and price.
• Easy field assembly
• Guaranteed cost-effectiveness
• Reliable connections
• Compatible with 900μm, 2.0mm, and 2.8mm cables
