The visible part of FiberView consists of 3 LED indicators:

• Red (Fail - Malfunction - Error)
• Yellow (Limit - Near Limit, Warning: impending failure)
• Green (Link/Act - Good signal level)

In all types of data transmission, there is a transmitter, a receiver, and a medium between them that carries the data transmission signal.
The medium that carries the signal consists of a material of a certain quality, with varying degrees of attenuation due to length (the defined length between the transmitter and receiver), and connectors that also cause attenuation.

Attenuation can be variable and depend on parameters such as: changes in ambient temperature, the actual radius of bends in the optical fiber, and the quality of the connectors used.

examplewebExample application of a D-Light product:
• Redundant Profibus DP Master and
,
• Non-Redundant Profibus DP Slaves:


Redundant Profibus DP:
The illustration shows a Profibus setup with two PLCs and the redundant Profibus network. Each PLC can operate independently as a Profibus DP Master.

The Comsoft PRS – “Profibus Redundancy Switch” – allows automatic switching (or user-requested switching) between the two PLCs, switching to the current Master if it fails for any reason.

The PRS connects to the Profibus Redundancy Ring, built using a number of eks Engel DL-485PBR Data-Light converters. Each DL-485PBR allows the addition of a Profibus cable segment with up to 32 Profibus DP Slaves to the mixed Profibus topology.

More information or a quote