In industrial networks, Ethernet has initially prevailed from the enterprise level through the operational and process levels to the control level. The final level of the automation pyramid, the field level, is traditionally connected via various BUS systems. One reason for this is the fine branching and large number of devices at the field level. Hundreds of thousands of sensors and actuators in a production plant must be connected via extensive peripherals consisting of cables. All in all, a considerable amount of cabling and a significant cost factor. Furthermore, gateways and translators are always needed to translate data between the two worlds.
Recently, the need for a more efficient infrastructure at the field level has grown significantly. Increasingly, sensors require transmission speeds that BUS systems can no longer provide. At the same time, the existing Ethernet infrastructure is too expensive, too large, and excessive for most field applications. This applies to the cables, connectors, and device components. A thin, lightweight, yet powerful Ethernet infrastructure was needed to enable industry to digitize at the field level and thus make the leap to the IIoT. This is where SPE comes in.
The industry is eager to capitalize on the benefits of this thin cabling. In automation, SPE enables seamless connectivity of field devices, sensor/actuator technology, and much more. The field level becomes smarter, thus reducing the effort required for parameterization, initialization, and programming. System construction, operation, and maintenance become more efficient and cost-effective. For the first time, Ethernet can communicate efficiently from the cloud to the field.
SPE technology in machines, robots, or railways also contributes to weight and space savings. All cabling becomes simpler and can also be installed much faster.
The IIoT
Ethernet infrastructure with TCP/IP makes every field participant intelligent. With TSN (Time-Sensitive Network), they also become capable of real-time operation and can therefore be used in safety-relevant cabling. Unlike BUS systems, the significantly higher data transmission rate will also allow for the cost-effective connection of sensors with high data volumes in the future. For example, camera vision systems for recognition and positioning. Previously, such sensors had to be routed separately to the field using an 8-wire Ethernet infrastructure. With SPE, each sensor can be uniformly connected to the Internet. T1 industrial device interfaces and SPE cables according to ISO/IEC 11801-X form the standardized infrastructure for SPE at the field level. It is as fine as a conventional BUS infrastructure but significantly more powerful in terms of data transmission speed and simultaneous power transmission. Every small sensor becomes an intelligent participant in the Industrial Internet of Things.
Does SPE replace existing Ethernet infrastructure?
Probably not. In its current state of development and standardization, SPE transmits 1 Gbit/s only up to a distance of 40 meters. 8-wire Ethernet, however, can transmit up to 100 meters. Furthermore, a large number of interfaces and devices would need to be converted, which is unnecessary. Ethernet is used over a single pair of wires where significant space and weight savings are advantageous. Applications in the railway industry include, for example, reduced weight, which translates into enormous potential cost savings.
Ethernet is gaining increasing relevance in automation and is becoming more widely accepted as a universal medium. BUS systems, on the other hand, are steadily declining. It is precisely in this area, from the control level to the field level, that SPE BUS systems will lose market share. The standard miniaturized SPE interface for industrial applications, industrial style T1 according to IEC 63171-6, can efficiently reach every sensor and actuator in the field along with thin SPE cables.
SAFETY THROUGH STANDARDS
IEC 63171-6 THE INDUSTRY STANDARD FOR SPECIAL INTERFACES
IEC 63171-6 was published in early 2020, making it the world's first standard for SPE connections in industrial applications adopted by major standards bodies. Originally introduced in 2016, the comprehensive standard document includes all the specifications and test procedures necessary for simple and reliable implementation.
WIRING STANDARDS ISO/IEC JTC 1/SC 25/WG3 & TIA42 - FOR COMPLETE COMPATIBILITY
For a secure end-to-end connection, all infrastructure components must meet uniform standards. This includes cables.
These wiring standards provide users with information on the wiring structure, the wiring components to be used to achieve performance objectives, and the limits for verifying the wiring. This makes them the most important tool for configuring and commissioning SPE cabling. At the same time, they ensure compatibility between devices and cabling through references to component standards (e.g., connectors according to IEC 63171-6). This compatibility is a basic prerequisite for the function of SPE-based networks and connections and, therefore, the foundation of IoT/IIoT. The use of cabling components that do not conform to, for example, ISO/IEC 11801-3 Amd.1 is possible in principle, but it no longer conforms to the standards and carries the risk of incompatibilities and functional losses.
ISO/IEC JTC 1/SC 25/WG 3 and TIA42 began international selection processes in early 2018 to define uniform interfaces. These two selection processes were partly initiated by IEEE 802.3, which requested a recommendation for an SPE MDI (SPE Device Interface) from ISO/IEC and TIA.
More than 20 national expert committees participated in this selection process. As a result of this choice, two mating faces prevailed:
For building the wiring (M1I1C1E1) the mating face according to IEC 63171-1:
This mating face is based on the proposal of the company CommScope;
For industrial and industry-related applications (M2I2C2E2 and M3I3C3E3) the mating face according to IEC 63171-6 (formerly IEC 61076-3-125):
This mating face is based on the proposal of HARTING T1 Industrial.
IEEE 802.3
Ethernet protocol standards define the technical framework for Ethernet transmission over a single pair of wires. This is a key committee with the authority to set trends. Without a uniform protocol, there is no open standard. To support the interaction of standardized components for a holistic Ethernet system, IEEE 802.3 follows the recommendations of ISO/IEC JTC 1/SC 25/WG 3 and TIA42 for a uniform SPE interface and also recommends the T1 industrial style (IEC 63171-6) as the standard SPE interface for industrial applications.
