Among the available wireless connectivity products are:
The Texas Instruments SimpleLink CC2651R3 2.4 GHz wireless microcontrollers are capable of supporting a single protocol, such as Zigbee®, Bluetooth® Low Energy, or TI's SimpleLink 15.4 stack. The 48 MHz Arm® Cortex®-M4 microcontroller core also houses a transceiver with a transmit output of +5 dBm and a receiver sensitivity of -104 dBm. It also features 352 KB of flash memory, multiple analog and digital peripherals, and a 128-bit AES cryptographic accelerator. Typical MCU power consumption is 2.91 mA in active mode, decreasing to 0.8 µA in standby mode and 0.1 µA when powered off.
• Linx Technologies' ANT-W63WSx Wi-Fi® 6/6E/7 fan antennas are a compact series of medium-wave dipole antennas with an independent ground plane that provide 2.4, 5, and 6 GHz operation and are available with swivel and hinged SMA or RP-SMA connectors. They feature an omnidirectional radiation pattern, 50 Ω impedance, and a maximum VSWR of 3.5:1 across their range. Common applications include smart home networks, IoT and IIoT nodes, and remote monitoring devices.
The Laird External Antennas CFSA69594Px 5G ceiling-mount antennas are suitable for a wide variety of indoor 5G applications. These very low-profile antennas have a UL94-V0 flammability rating and can be mounted directly onto ceiling tiles or hard ceilings, preserving the building's decor and aesthetics. Supporting an operating frequency range of 698 to 5925 MHz and capable of handling up to 50 watts, the antennas exhibit an average VSWR greater than 1.4:1. The nominal impedance is 50 Ω.
Linx Technologies' IPW series outdoor antennas are IP67 rated and can be permanently mounted on any metallic or non-metallic surface. These medium-wave dipoles with independent ground plane are available for a wide operating frequency range of 617 MHz to 7.1 GHz, offer a gain of 8.7 dBi, and can be purchased with an SMA, RP-SMA, or N connector. Applications range from LPWAN and sub-GHz ISM networks to wireless mobile and Wi-Fi.
