The device is well-suited for various wireless communication applications where low power consumption is of paramount importance in sectors as diverse as automotive, security, and building automation.
One of the main applications of this device is remote passive car ignition, where it transmits a high-power LF signal to activate the key inside the car. The key sends its encrypted identification number to the car via an ultra-high frequency (UHF) signal, enabling the engine to start. It can also perform a similar function with other vehicles, such as motorcycles, mopeds, ATVs, jet skis, snowmobiles, and motorboats, where the key holder can be detected when approaching the engine and activated with a "Start" button. It can also serve as a "dead man's switch" so that, in the event of the driver falling, the engine automatically shuts off. Furthermore, it can be integrated into building access control systems, tire pressure monitoring system initiators, and pet identification systems.
Both LF drivers can be programmed to generate sine waves (1A peak maximum) or square waves (2.5A peak maximum) at frequencies of 109kHz and 140kHz, with an output amplitude of 0.25V to 32V peak-to-peak. These drivers can be used in full-bridge and half-bridge configurations and feature sophisticated protection mechanisms against overcurrent and overtemperature. ASK (amplitude-shift keying) or PSK (phase-shift keying) modulation can be used to transmit LF telegrams to the LF key or receiver. A highly flexible data programming method allows compatibility with numerous encoding types.
The two built-in immobilizers are compatible with ASK and FSK (frequency-shift keying) modulations. They can be used if the key's battery is depleted and therefore unable to generate a signal. Under these circumstances, passive RFID communication can be initiated when the key is very close to the initiating device. The immobilizers are compatible with most commonly used passive transponders.
The MLX74190's diagnostic capabilities allow it to detect various types of LF antenna connection errors (such as short to ground, short to Vbat, open load, or incorrect resonant frequency). The device is supplied in a compact 48-pin TQFP package. Its operating temperature range is -40°C to 105°C, and its starting price is $2.76 per unit for orders of 10,000 units.
More information or a quote