The DSC6000 single-output MEMS oscillators are an excellent choice for use as reference clocks in small, battery-powered devices, such as wearables and Internet of Things (IoT) applications, where small size, low power consumption, and long-term reliability are critical. They also meet the demanding durability and mechanical reliability requirements of the Automotive Electronics Council's Q100 standard (AEC-Q100), making them suitable for under-the-hood applications as well.
Microchip's DSC6000 oscillators are supplied in standard 4-pin DFN packages ranging in size from 1.6 x 1.2 mm to 7 x 5 mm, and consume only 1.3 mA (typical), less than half the current draw of the lowest-power quartz oscillators. They also feature a maximum operating temperature range of -40°C to +85°C and a maximum drift of +/-25 ppm within this range. They offer 500 times the shock resistance and five times the vibration resistance of a quartz oscillator, ensuring robust stability in most operating environments.
Microchip's ClockWorks® online configuration tool allows designers to easily select the appropriate oscillator based on frequency, package, ppm, and temperature range, and then order free samples of that oscillator directly through the tool. The TimeFlash field programming kit provides instant frequency generation on One-Time Programmable (OTP) memory in a blank DSC6000 device, available separately.
To facilitate evaluation and development, Microchip's ClockWorks configurator is available at clockworks.microchip.com/Timing. Microchip's TimeFlash Field Programming Kit for the DSC6000 family is available at http://www.microchip.com/timeflash and is priced from $130 to $350. Pre-programmed evaluation boards are also available upon request.
The DSC60xx and DSC61xx are already in production and are supplied in the following packages: 1.6 x 1.2 mm; 2.0 x 1.6 mm; 2.5 x 2.0 mm in 4-pin VLGA; and 3.2 x 2.5 mm in 4-pin VDFN.
