Implementing a male connector at a 90° angle to the printed circuit board increases traceability, maximizing board space utilization. Connectors can now be positioned at the edge of the board by routing a wire attached to the side of the board stack. A key application that will benefit from this type of connection is CubeSats, as many designs utilize densely stacked boards, with all wiring routed outside the stack. Similar space constraints exist in aviation (particularly in the design of unmanned aerial vehicles), large satellites, defense (such as radar and portable communication equipment), robotics, and motorsports.
The horizontal connectors can also be used with female board connectors in order to obtain a mother/daughter board configuration that is useful as an alternative to modular printed circuit boards or large equipment systems.
The horizontal Gecko-SL connectors feature stainless steel screw locks and incorporate a push-to-lock mechanism for ease of use; simply press the connectors together completely before tightening the screws. Engineers can choose between the standard screw lock mounted on the board (with the screw on the female connector) or the reverse lock (with the screw on the male connector). The pin count is the same as in other Gecko-SL series, ranging from 6 to 50 contacts.
As required by Harwin's high-reliability connectors, these new horizontal components offer the most robustness on the market. Gecko-SL has an operating temperature range of -65°C to +150°C and is notable for its resistance to strong vibrations (20 G at 2 kHz for 6 hours) and shocks (up to 100 G), as well as very low outgassing that meets NASA and ESA specifications. Its rated current is a maximum of 2.8 A for a single contact and 2 A per contact when all are loaded.
