REDFIT IDC is available in versions ranging from 4 to 20 pins and is suitable for continuous use on printed circuit boards, as well as for temporary connections for programming and debugging.
REDFIT IDC is a solderless connector with SKEDD contacts and a direct connection technique. The connector is manually inserted directly into the metallized holes of the printed circuit board. This eliminates the need for female connectors and the subsequent soldering process. The REDFIT IDC SKEDD connector allows you to save on the female connector, thus reducing assembly and manufacturing costs.
Compact designFor applications with limited space, the lower the height and space required for the pin strip counterpieces, the better. In the case of REDFIT IDC SKEDD connectors, the PCB design only accommodates the connectors; there are no additional space requirements above the PCB.
The SKEDD connector is connected to the ribbon cable using an insulator displacement technique. The plastic guides on the underside of the housing are longer than the contacts, preventing short circuits on the lower printed circuit board. Multiple thick guide pins ensure secure contact between the poles, allowing for easy, tool-free connection and disconnection of the SKEDD connectors. Depending on the application, between 10 and 25 connection cycles are specified.
The REDFIT IDC SKEDD WR-WST connector's plastic housing is made of halogen-free liquid crystal polymer (LCP) with a UL94-V0 flammability rating. The specified operating temperature ranges from -25 to +105 °C. The contact material, a copper alloy, is gold-plated on the SKEDD side and tin-plated on the insulator offset side. The SKEDD contacts of the double-row connector have a 2.54 mm pitch offset. The cable connection is made to a flat cable with AWG 28 and a 1.27 mm pitch. Other notable technical characteristics include a rated current of 1.0 A per pin, an operating voltage of 100 V, an insulation resistance >1000 MΩ, an electrical rigidity of 500 Vac/min, and a maximum contact resistance of 10 mΩ.
Multiple options for connecting and disconnecting“REDFIT IDC SKEDD robust connectors are ideal for all applications requiring a stable signal connection while maintaining a small footprint. They are also useful in situations where tool-free connector release is necessary for maintenance. A good example is the debugger/microcontroller scenario. Previously, every time firmware was installed after assembly, an additional connector had to be soldered to the board for that purpose—an extra component that was often used only once. Our SKEDD connector saves material, space, and costs in this case,” explains Daniel Kübler, Business Development Manager at Würth Elektronik eiSos.
The REDFIT IDC SKEDD connector is now available from stock in 4, 6, 8, 10, 12, 14, 16, 18, or 20-pin versions in any quantity. Free samples are available upon request.
More information or a quote