High1The planned developments for 2013 on the HD platform are:
Integration of MTP/MPO cassettes to LC duplex/SC/E200 in 12 and 24 fiber formats, as support for future migration to 40 and 100 Gigabit Ethernet technology, each cassette occupies the space of one front module, thus allowing up to 4 cassettes to be mounted in 1 High2rack unit.


Launch of front panels for 6 RJ45 Cat5e and Cat6 connectors. Support for lower-performance legacy systems for service applications (KVM, control, etc.) up to 24 ports in 1 rack unit.


Integration of fiber optic termination cassettes in both breakout and High3pigtail formats, up to 12 fibers. This way, the HD panel covers any optical termination possibility, maintaining the philosophy of using only one cassette per front panel module.


Upcoming launch of R&M Uniphy's intelligent cabling infrastructure management and monitoring system, based on the R&M HD platform.


Any front panel or cassette mounted on an HD panel can be included in the interconnect monitoring. An existing infrastructure with HD panels can be upgraded to R&M Uniphy simply by adding the active connection management elements.
The HD panel becomes a universal element for the data center cabling infrastructure, providing:


1. High port density per rack unit, thus increasing space efficiency in wiring and server cabinets.
2. High flexibility, allowing the combination of different RJ45 connector performance levels and different media (fiber optic and copper) within the same platform. This feature increases cabinet space efficiency, eliminating the need for multiple platforms if copper and fiber optic cabling are required within the same server and/or wiring cabinet.
3. Supports pre-terminated trunks, both copper and fiber optic, which can coexist within the same panel with front panels or cassettes terminated in the traditional way.
4. Enables the evolution from a traditional passive system to an intelligent management and monitoring system: R&M Uniphy Ready!
5. Facilitates network maintenance. Its front-mounted front panel and cassette system allows maintenance work to be performed on the specific bay where the problem may have occurred, without disrupting the other services located in the other modules of the same panel.

Additionally, the R&M HD panel, working in conjunction with the range of data center rack cabinets (R&M CME/CMO/CMP) and their optimized lateral cable routing management systems, allows for their deployment without the need for horizontal cable organizers, thus optimizing the space occupied by cabling hardware within the data center. Optimizing infrastructure investment doesn't always depend on the direct acquisition cost, but also on savings in other areas such as space, operation, and maintenance.

High4The new HD panel integrates 48 RJ45 ports into a single compact 19" rack unit. The standard version includes cable management clips, while the basic version has been shortened at the rear, making it more suitable for narrow racks and distribution frames installed on raised floors. Photo: R&M.

High5The new R&M HD panel integrates 48 RJ45 ports into a single compact 19" rack unit. The use of LC and MPO/MTP adapters is particularly well-suited. The HD panel is a good starting point for future expansions of modern, high-performance data networks operating with 10 and 40/100 Gigabit Ethernet protocols. It features an additional plate that covers and protects fiber optic cables. Photo: R&M.

High6The 24-port version of the R&M HD panel has space in the second row for large labels. It is expandable up to 48 ports. The entire assembly includes protective features and space for labeling and coding. Photo: R&M

 

High7The compact HD panel module bracket is an R&M innovation. It features an integrated cable clamp system and strain relief. The unit requires no tools for installation or removal. Photo: R&M

More information or a quote