Features
Applicable fiber: SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655).
Cladding diameter: 80-150 μm
Coating diameter: 160-900
Typical splice loss SM: 0.02 dB, MM: 0.01 dB, DS: 0.04 dB, NZDS: 0.04 dBshinho x600-3 fusion splicer
Return loss > 60 dB
Fiber cut length 10-16 mm (cladding diameter < 250 μm), 16 mm (cladding diameter: 250-1000 μm)
40-group splice program
Automatic or manual operating mode
Automatic warm-up available
Typical warm-up time 20 seconds
Fiber zoom 250X (X or Y view), 125X (X and Y view)
4.3" color LCD display.
4000-group record storage
Loss evaluation available
Tension test > 1.8-2.2
N GUI menu interface
Lithium battery 4400 mAh battery, typical 300 splicing and heating cycles, supports separate charging,
Power supply: Adapter, Input: AC 100-240V (50/50Hz), Output: DC 11-13.5V
Electrode lifespan: Over 4000 ARC discharges, conveniently replaceable
USB 2.0 port for uploading fusion splicer results and updating software
Operating conditions: Altitude: 0-5000m, Humidity: 0-95%, Operating temperature: -10°C to +50°C, Wind speed: Max. 15m/s
Dimensions: 60mm (L) * 136mm (W) * 148mm (H) (including rubber armor)
Weight: 2.20kg (including battery)


This email address is being protected from spambots. You need JavaScript enabled to view it.