The increase in traffic within and between cloud data centers is driving the need for low-cost 100G and high-speed, low-power 200G and 400G interconnects. To increase bandwidth density per port, data center OEMs will adopt faster data rates starting in 2018. These interconnects will be supported by smaller QSFP, QSFP-DD, and OSFP form-factor modules, which require vendors to supply lower-power electronics. MACOM's chipset addresses these power density and bandwidth needs by supporting single-wavelength interconnects using EML lasers or silicon photonics, within the power envelope requirements of these smaller form-factor modules.
“Major data center operators are currently deploying 100G optics in volume to build their switching fabrics within the data center,” says Ian Redpath, Practice Leader, Components, Transport, and Routing at Ovum. “Today, the data center interconnect market is driven by advancements in Ethernet switch ASICs. As 400G switches enter the market, optical transceivers will need to keep pace with the rapid transition to 400G. Ovum projects that the 100G-equivalent data center interconnect market will grow at an explosive CAGR of 56% by 2021, driving the need for low-cost 100G single-lambda solutions. At the same time, the industry will begin adopting higher-speed 400G links, also using single-lambda technology. We expect MACOM’s PAM-4, TIA, CDR, and laser controller chipset to help drive these deployments.”.
"In 2016, MACOM's silicon solutions enabled more than one million 100G modules for data center and enterprise applications, positioning us as the market leader in this space," commented Marek Tlalka, Director of Product Marketing at MACOM. "Our new chipset offers the analog and photonic components required by OEMs to accelerate their transition to single-lambda 100G and beyond.".
MACOM showcased its 53 GBaud PAM-4 technology at OFC 2017. The demonstration of 100G transmission over a single lambda fiber included MACOM's PAM-4 PHY technology along with MACOM and TIA's 53 GBaud linear controller, capable of driving up to two kilometers of single-mode fiber using an EML laser.
For more information on MACOM's broad optical and photonics portfolio, visit www.macom.com.
The MACAM PAM-4 technology chipset for 100G, 200G, and 400G lambda fiber includes the following new products:
• MATA-005817: Single-channel 53 GBaud PAM-4 linear TIA for 100 Gbps single-lambda applications
• MAOM-005311: Single-channel 53 GBaud PAM-4, 1.8 Vpp linear controller for 100 Gbps single-lambda EML transmitters
• MATA-03819: Four-channel 53 GBaud PAM-4 linear TIA for 200 Gbps and 400 Gbps parallel fiber applications with PIN photodetectors
• MATA-03919: Four-channel 53 GBaud PAM-4 linear TIA for 200 Gbps and 400 Gbps multi-wavelength single-fiber applications with APD photodetectors
• MAOM-005411: Four-channel 53 GBaud PAM-4, 1.8 Vpp single-ended linear controller Vpp for 100 Gbps by parallel and multi-wavelength transmitters based on EML lambda
• MAOM-38051: a 4-channel 28 GBaud PAM-4 (56Gbps) transmit CDR with integrated 2.5V differential pre-driver and adaptive equalizer for EML applications
• MAOM-38053: a 4-channel 28 GBaud PAM-4 (56Gbps) transmit CDR with integrated 2.5V differential driver and adaptive equalizer for silicon photonics applications
• MASC-38040: a 4-channel 28 GBaud PAM-4 (56 Gbps) analog receiver CDR with integrated limiter amplifier for applications as a companion to the TIA.
