Most SMD antennas utilize the surface of the printed circuit board surrounding the antenna as a ground plane from which to radiate the signal. Therefore, it is the ground plane requirement, not the antenna's physical dimensions, that defines the space needed. Antenova's radiated measurement results show that Agosti performs well on small ground planes of 40 x 20 mm, 70 x 25 mm, and 80 x 30 mm, making it a good choice for small form factor designs.
Agosti also offers designers some additional design options, as it is designed to be placed in a corner of your PCB.

Agosti is designed to integrate and coexist with other antennas within the same device. On-board diagnostics (OBD) systems and trackers often use 4G/LTE with A-GPS as a backup, and the Agosti antenna was tested with Antenova's Pharoah antenna, part number SR4L073, which also has a very small ground plane requirement. The two antennas have excellent isolation and can operate very close to each other in a very small device without the 4G signal interfering with sensitive GNSS signals.

More information