Antennas and links

Mouser now distributes the TE Connectivity/Laird External DBA6171Cx 5G/4G indoor/outdoor blade antennas. These rugged omnidirectional antennas are ideal for fixed wireless access devices, private cellular networks, and light industrial IoT applications.

Mouser now has TE Connectivity/Laird External Antennas' ground-plane-less 5G Phantom antennas in stock. These antennas provide engineers with a versatile, global cellular antenna option for IoT, cargo and transportation environments, and public safety applications. These ground-plane-less 5G Phantom antennas cover 617 to 7125 MHz or 698 to 7125 MHz without requiring a fixed ground plane, even in regions where 600 MHz bands are needed.

The SENCITY Occhio Plus indoor antenna - launched by HUBER+SUHNER - offers mobile network operators a faster way to ensure high data throughput in the 5G frequency range in buildings.

The HUBER+SUHNER Global Navigation Satellite System (GNSS) and fiber-powered solution offers advantages before, during, and after installation to telecommunications providers working in the 5G and data center space. Using fiber optics as the antenna power medium results in cost and time savings during installation and operation, as it eliminates the need for rooftop power distribution.

Mouser now has in stock the IPW series of rugged outdoor dipole antennas with IP67 ratings from Linx Technologies. The ANT-W63-IPW3-NP Wi-Fi 7/6/6E outdoor whip antenna is designed for 2.4, 5, and 6 GHz bands and is compatible with Wi-Fi 7, Wi-Fi 6, and Wi-Fi 6E.

Circuit Design, Inc. introduces the 869 MHz models of the compact UHF transmitter (CDP-TX-07MP) and receiver (CDP-RX-07MP). The CDP series of compact narrowband radio modules is designed for industrial radio applications, including remote control.　

Mouser distributes the latest antennas from TE Connectivity / Laird External Antennas. Available in both fixed and portable versions, these antennas are ideal for environments requiring wide-angle coverage for effective wireless network deployment and offer an attractive design. The CFSA69594Px Distributed Antenna System (DAS) 5G ceiling-mount antennas are ultra-low-profile, omnidirectional, broadband antennas for indoor ceiling mounting with low PIM (Protocol Independent Multicast) and include plenum-category cables.

Mouser now has Linx Technologies' ANT-W63WSx Wi-Fi 6/6E/7 fan-shaped antennas and ANT-5GWWS6-SMA 5G sub-6 mobile network antennas in stock. The ANT-W63WSx Wi-Fi 6/6E/7 fan-shaped antennas offer engineers superior performance for IoT and smart home applications in the 2.4, 5, and 6 GHz bands, and also support Wi-Fi 6, Wi-Fi 6E, and Wi-Fi 7.

Antenova Ltd announces three antennas for Wi-Fi 6 and Wi-Fi 6E. These include a surface antenna, a flexible antenna, and an external antenna for Wi-Fi 6 and Wi-Fi 6E. All three antennas utilize the 2.4 GHz, 5 GHz, and 6 GHz bands and are compatible with the IEEE 802.11a/b/g/j/n/ac/ax standards.

Mouser now distributes Laird Connectivity's FlexPIFA™ 2-dBi and FlexPIFA 3-dBi antennas with MHF1/U.FL cables. These are the industry's first flexible Planar Inverted-F Antennas (PIFAs) designed for Wi-Fi or Bluetooth® applications that can be mounted on non-conductive or irregular surfaces, regardless of humidity or hot/cold cycling (from -40 to +85 °C).

Antenova Ltd introduces a new, compact, and highly efficient antenna for 2.4 to 2.5 GHz Wi-Fi, Bluetooth, and ZigBee frequencies. This new antenna is called Invicta, part number SRFW082. The Invicta antenna has an average efficiency of 70% in the 2.4 GHz band. Consequently, designs using this antenna will perform better, over longer distances and through walls and obstacles, thus extending the coverage and performance of wireless devices using Bluetooth, Wi-Fi, and ZigBee.

Antenova Ltd is adding a new offering to its range of miniature surface-mount (SMD) antennas and modules for GNSS applications. The new antenna, Agosti, part number SR4G080, measures 9.0 x 5.8 x 1.7 mm and operates with exceptional efficiency in the confined space of a corner of a printed circuit board.
The key advantage of the Agosti antenna is its small ground plane requirement.

Antenova Ltd introduces a new, smaller SMD antenna for 5G and 4G frequencies. The antenna, called Minima (part number SR4L075), measures 40 x 10 x 3.3 mm and is the smallest 5G antenna Antenova has released to date. Its small size and low weight (under three grams) make it suitable for small, lightweight designs for both 4G and 5G frequencies, as well as designs that utilize both frequencies.

Fading is a common phenomenon in coastal areas, where heat and humidity hit particularly hard, but it can occur anywhere the propagation medium conditions are altered, causing the signal to deteriorate.

Narda Safety Test Solutions has developed two new 5G antennas for its SRM-3006, opening up the upper 5G FR2 frequency band to the handheld unit system for measuring field strength. An omnidirectional downconverter antenna and a directional antenna will now record electromagnetic fields (EMF) and their sources in the 24.25 to 29.50 GHz range.

Antenova Ltd introduces a new low-profile antenna that delivers excellent performance in both the 868 MHz European and 915 MHz US bands.
The new 'Lama' antenna, part number SRFI065, has been developed for small connected devices operating on LP-WAN networks, including LoRa, Sigfox, Wi-SUN, and MIoTy.

Antenova Ltd has halved the footprint of its 4G cellular antennas with its latest offering, the Pharaoh SMD antenna. Designed for small PCBs, Antenova's Pharaoh antenna (P/N SR4L073) covers all 4G frequencies: 698–824 MHz, 824–960 MHz, 1710–2170 MHz, 2300–2400 MHz, and 2500–2690 MHz.

D-Link has introduced the new DWA-X1850 USB Wi-Fi 6 AX1800 adapter to upgrade any laptop or computer (with Windows operating system) to the latest Wi-Fi 6 technology by connecting it to a USB 3.0 port.

Since the inception of wireless communications, network synchronization has been a critical component enabling wireless services. Synchronization requirements are typically set as an "absolute" measure, meaning that the synchronization must be traceable to a known source. In phase/time applications, this traceable source is usually a satellite constellation.

Antenova Ltd has introduced its latest antenna, Atta, part number SRFI079, for LTE and smart wireless deployments in the 410 MHz and 450 MHz bands.
The Atta antenna is a flexible printed circuit board (FPC) measuring 101.0 x 20.0 x 0.15 mm. It comes with an I-PEX mating connector for direct integration onto a circuit board and a self-adhesive pad for easy mounting. Therefore, it is easy to integrate into a design.