The Brodersen RTU32M is a complete solution for Smart Grid communications. It is a proven solution for four typical applications in this sector:

1) Control and maintenance of pumping and water treatment stations.
2) Substation automation.
3) Monitoring of railway level crossings.
4) Communication gateway between SCADA protocols, including Modbus, DNP3, and IEC60870.

M-Bus or Meter-Bus is a twisted-pair network that serves both for power supply and communication of the reading of consumption meters and meters such as water, electricity, gas and heating...
It is applied in AMR (Automatic Meter Reading) of meters and meters.

ADVA has announced that its FSP 150-GO102Pro series is one of the first technologies to receive MEF 3.0 CE certification. Compliance with the new specification demonstrates that ADVA's Carrier Ethernet (CE) IP and Ethernet service demarcation solution supports the transformation to automated networks and can be used to build 5G-ready architectures.

Omron introduces its new NX Series Safety Network Controller, which supports two safety protocols: CIP Safety™*2 and Safety over EtherCAT®*3 (FSoE). This NX Series Safety Network Controller enables the development of safety systems for large production lines using industrial robots, as well as for manufacturing equipment requiring high-speed control.

Siemens is expanding its portfolio of Simatic Ident communication modules. The first devices in this new series to be launched will be the Simatic RF185C, RF186C, and RF188C. The available options allow for one, two, or four readers to be connected and controlled via Ethernet/Profinet, matching the number of connections to the existing number of readers.

Moxa launches the MGate 5114 series of protocol gateways that support Modbus RTU/ASCII/TCP, IEC 60870-5-101 and IEC 60870-5-104 protocol conversions and help users establish communications between legacy and upgraded systems in power grid applications.

WireXpert is the first cable certifier with full compatibility for X-coded industrial Ethernet cabling. M12 adapters are available for WireXpert 4500 and WireXpert 500. The WireXpert industrial Ethernet cabling testing solution includes two M12 adapter kits. Both channel and permanent link configurations are supported with M12-compatible industrial Ethernet connectors. Standalone kits are available for testing dual-pair (D-coded) and quad-pair (X-coded) industrial Ethernet cabling.

Moxa Inc. presents its expertise in Time Sensitive Networking (TSN) technology at the SPS IPC Drives 2018 trade show, offering visitors a glimpse into how standard Ethernet with TSN technology will enable the exchange of all data in parallel or vertical automation architectures in real time and with low deterministic latency, thus unlocking the possibilities of the Industrial Internet of Things (IIoT) and Industry 4.0.

Moxa Inc. Introduces its edge gateway for the Industrial Internet of Things (IIoT) that provides Microsoft Azure customers with an easy-to-use solution to extend their IT infrastructure and facilitate OT data connectivity within their industrial applications.

ER-Soft distributes this equipment to easily communicate between two different industrial protocols.

This all-in-one solution allows you to connect sensors and actuators to a single module. Simultaneously, you can safely disconnect the actuator segment via its separately switchable safety circuit, as this module is divided into two galvanically isolated segments.

Panduit's range of RJ45 jack locking devices ensures the security of your network infrastructure. Compatible with most RJ45 connections, the locking device fits into the RJ45 jack and can only be released using a special removal tool, preventing unauthorized network access and saving time and money associated with data breaches, network downtime, repairs, and replacement hardware.

Rockwell Automation introduces the Allen-Bradley Guardmaster GuardLink safety system, a new safety-based communications protocol that helps operators reduce and improve machine downtime and diagnostics.

Moxa's new UC-3100 series computers can be used as intelligent field gateways for data preprocessing and transmission, as well as for other embedded data acquisition applications. The UC-3100 series includes three models, each with different options and wireless protocols.

Omron Corporation has announced the international launch of its new NX1 series machine automation controller. Omron will release the NX-HAD4 high-speed analog input unit ^(*1) and the NX-SL5 safety CPU unit ^(*2) , both of which are compatible with the NX1 series.

TURCK, represented by Elion, has launched a new RFID module from its TBEN-L family (IP67, IP69K and extended temperature range -40ºC to +70ºC) with the ability to communicate via OPC-UA acting as a server.

Moxa announces the development of gateways for the Industrial Internet of Things (IIoT) that integrate Microsoft Azure IoT Edge, thus strengthening its promise to accelerate the convergence of operational technology (OT) and information technology (IT).

QNV presents the new SETO servers from Adlink. This is the new family of "extreme outdoor" servers, boasting high computing power and ultra-robust design, capable of operating outdoors.
They have been specifically designed for the new MEC (Mobile Edge Computing) architectures, which reduce traffic and decongest bandwidth in cloud-based networks for telecommunications applications.

Belden Inc. has launched a new family of MPLS-TP-based backbone switches with premium provisioning software: DRAGON PTN with Hirschmann HiProvision. This new backbone network device reliably and efficiently transports mission-critical data and ensures bandwidth in wide area networks thanks to MPLS-TP technology.

Moxa introduces its new series of LTE-ready Arm Linux IIoT gateways, the UC-2100, UC-3100, and UC-5100. These industrial computers are integrated into Arm-based Linux platforms that include Moxa Industrial Linux (MIL) and the optional ThingsPro™ gateway data collection software, thus simplifying the development of various IIoT gateway applications.