Plug-in hybrid starter controller
The new variants of Phoenix Contact's Contactron hybrid starter controllers allow for quick and easy integration into common fieldbus systems such as Profibus, Profinet, CANopen, DeviceNet, Modbus, and EtherNet/IP.
Industrial Ethernet
- Details
- Category: Industrial Ethernet
-
By Carlos Martinez
Frontline Test Equipment's NetDecoder™ protocol analyzer is software designed to diagnose and troubleshoot communication problems in industrial networks. NetDecoder can monitor and provide detailed data, information, and timings for serial communication, fieldbus, and Ethernet networks.
- Details
- Category: Industrial Ethernet
-
HARTING has expanded its Gigabit Ethernet product range with the har-speed M12/RJ45 adapter. The new adapter is compact and designed for Ethernet communication or signal transmission in demanding industrial environments.
- Details
- Category: Industrial Ethernet
-
S5 for Windows®, distributed by AN Consult Spain, is compatible with Windows 7 and Windows 8. S5 for Windows® is an effective tool for creating, modifying, testing, and documenting programs for the SIMATIC S5 PLC family from SIEMENS using the STEP5® programming language.
- Details
- Category: Industrial Ethernet
-
The new AXC 1050 controller from the Axiocontrol series by Phoenix Contact is specially designed to work in harsh industrial environments.
- Details
- Category: Industrial Ethernet
-
QNV introduces the Korenix JetPort 5800 serial-to-wireless servers. These are redundant Ethernet and wireless serial-to-wireless servers for harsh industrial environments and where mobility of any of the connected devices is required.
- Details
- Category: Industrial Ethernet
-
Starting with firmware version 2.142, it is possible to establish data communication between two PLCs, each of which has an IBH Link S7++. Communication is also possible from an IBH Link S7++ to an IBH Link S5++.
- Details
- Category: Industrial Ethernet
-
Phoenix Contact has expanded its product range for sensor-actuator wiring. The new variants, designed for use in the food industry, are distinguished, among other things, by their very smooth surfaces and the use of a hygienic design with 1.4404 stainless steel.
- Details
- Category: Industrial Ethernet
-
Amphenol's new Cat5e adapter offers IP68 protection on the M12 side, even when not connected. With these new M12-RJ45 adapters, Amphenol provides designers with additional options for integrating Industrial Ethernet connections into existing RJ45 networks.
- Details
- Category: Industrial Ethernet
-
With the FIELDLINE family, Phoenix Contact has created a field installation system with IP65/IP67 protection rating that opens up new possibilities with regard to:
- Details
- Category: Industrial Ethernet
-
Molex Incorporated has released a new firmware version for the SST™ Ethernet communication module. The firmware update supports Siemens' industrial Ethernet protocol for connecting ControlLogix programmable logic controllers (PLCs) with Siemens controllers
- Details
- Category: Industrial Ethernet
-
BIS V – the variable and intelligent system in a minimal footprint: connect up to four read/write heads to a single evaluation unit. With the Balluff BIS V industrial RFID, you can achieve fast, contactless data communication significantly more efficiently, as only the Balluff BIS V combines RFID with sensors.
- Details
- Category: Industrial Ethernet
-
Molex Incorporated introduces the SST™ IP67 PB3 Remote Module for PROFIBUS*. As a link device with integrated Ethernet and PROFIBUS communication ports, the SST IP67 PB3 Remote Module provides a quick and easy solution for adding Master and Slave PROFIBUS connectivity to Rockwell Logix controllers (CompactLogix, ControlLogix, SoftLogix†, etc.).
- Details
- Category: Industrial Ethernet
-
Molex Incorporated introduces the new Brad® Direct-Link® unmanaged switches in 5- and 8-port versions, both equipped with patented Ultra-Lock® push-pull technology. The new Direct-Link switching modules are weatherproof with an IP67 rating
- Details
- Category: Industrial Ethernet
-
Weidmüller's new serial/Ethernet converters easily and reliably integrate devices with serial interfaces into industrial Ethernet networks. On the Ethernet side, the devices support a wide range of drive modes, including TCP server, TCP client, UDP, Real COM, RFC2217, Reverse Telnet, Pair Connection, and Ethernet modem
- Details
- Category: Industrial Ethernet
-
Developed to help meet the need for manufacturing convergence, the Stratix 5700 Industrial Ethernet Managed Switch - powered by Cisco® technology - facilitates the fusion of EtherNet/IP with the rest of the enterprise.
- Details
- Category: Industrial Ethernet
-
Belden Inc. introduces three new I/O modules from Lumberg Automation's new LioN-R series, which can be used to securely connect sensors and actuators to EtherNet/IP networks in harsh environmental conditions.
- Details
- Category: Industrial Ethernet
-
It's a welcome bonus for Ethernet and structured cabling, but the demands on Power over Ethernet (PoE) technology are constantly growing. Will this much-loved solution get out of control? Paul Cave, Technical Manager at Mayflex, has studied some of the realities of this technology and tells us how we can use it intelligently.
- Details
- Category: Industrial Ethernet
-
WLAN is simply the transmission of Ethernet packets over the air. It would therefore be logical to assume that if the devices comply with environmental regulations and established standards, there should be no problem using them in industrial networks.
- Details
- Category: Industrial Ethernet
-
Molex Incorporated announces that its newly launched Brad® HarshIO PROFINET input/output (I/O) modules, featuring Fast Start-Up (FSU) technology, offer reliable solutions for connecting industrial controllers to input/output devices.
- Details
- Category: Industrial Ethernet
-
Siemens' Industry Automation division offers a redundancy solution based on the Parallel Redundancy Protocol (PRP) according to IEC 62439-3. With Scalance X-200RNA access points, it is possible to connect up to two network segments or terminals without PRP functionality via two parallel networks without delay.
More articles…
Page 8 of 10
-
-
SIMATIC ET200S Rack I/O Master/Slave CANopen Module
Er-Soft presents this 1 SI CANopen module, which provides CANopen connectivity to the SIMATIC ET200S distributed I/O system, enabling full integration between CANopen devices and the ET200S. Additionally, adding a 1 SI CANopen module to the ET200S system allows...
-
Ethernet-APL field switch at ACHEMA 2024
Softing Industrial announces the launch of its new "aplSwitch Field" at ACHEMA 2024. This next-generation, 16-port Ethernet-Advanced Physical Layer (Ethernet-APL) field switch with optional PROFIBUS Process Automation (PA) proxy is designed for use in Zone 2
. -
Ethernet switch for industrial automation for Profinet EL100-200MA
Eks Engel, distributed by ER-SOFT, presents a new Industrial Ethernet Switch for the e-light 2MA family that meets the Profinet Class B compliance requirements. Therefore, they can be fully integrated into automation systems such as TIA (Totally Integrated Automation) or CODESYS.
-
1 SI CANopen Module, Plug-in CANopen Master or Slave module for SIMATIC 1200 PLC/Automata systems and for ET200S distributed inputs and outputs...
The SI CANopen module provides CANopen connectivity to the SIMATIC ET200S distributed I/O system, enabling seamless integration between CANopen devices and the ET200S. Additionally, adding a SI CANopen module to the ET200S system allows for easy network control...
-
ClipX single-channel signal conditioner with 0.01 accuracy, 24-bit resolution, and a 3.5 kHz measurement bandwidth.
HBM Test and Measurement (HBM) presents its new ClipX industrial signal conditioner, based on the "Insert, Measure, and Control" concept. With its 0.01 accuracy class and integrated digital factory calibration certificate, ClipX sets a new benchmark in the world of control...
Newsletter
Latest News
PowerON by Sonepar Spain brings together 6,000 professionals and 56 exhibitors in its first edition
PowerON by Sonepar Spain brings together 6,000 professionals and 56 exhibitors in its first edition...
Nokia agrees to sell its Enterprise Campus Edge business to AURELIU
Nokia has signed a definitive agreement for the planned sale of its Enterprise Campus Edge business...
83% of operators cite data as a barrier to autonomous networks
A new report on the evolution of broadband networks identifies the quality of...
Synology presents new products in storage, video surveillance and AI at Solution Day
Synology presented new solutions related to... at its Solution Day in Barcelona.
Broadband Forum will showcase autonomous networks, agentic AI, and L4S at Network X
Broadband Forum will present seven demonstrations at Network X, held in Vienna, Austria...
Social networks
 |
 |
 |
 |
 |
Technical Courses and Seminars
D-Link announces its 30th season of free webinars on enterprise networking, Wi-Fi 7, and security
D-Link has announced the start of the 30th season of its D-Link Webinars, an online training program...
Factory Tomorrow analyzes networks and infrastructure for industrial AI and Industry 4.0
The season consists of three episodes and features Phoenix Contact and Belden....
Mouser drives IoT development with its LoRaWAN resource center and new wireless connectivity solutions
Mouser Electronics, Inc. highlights its comprehensive LoRa® resource center as the market accelerates...
DataCom: Technical guide for networks, fiber optics and structured cabling
Digital transformation has turned data networks into a critical infrastructure for...
Taoglas launches The Antenna Podcast, a new technical space about antenna design and innovation
Antennas remain one of the most critical and, at the same time, most misunderstood elements in...