HBM presents its new DSE-HIE load cell signal conditioner, which allows any load cell with strain gauge technology to be integrated into a modern industrial Ethernet system.

HMS Networks announces a new Intesis™ protocol translator for communication between PROFINET PLCs in production plants and Building Management Systems (BMS) using BACnet IP/MSTP. This enables complete data integration, monitoring, and control between production plants and building systems. Key objectives can be achieved through factory-to-building communication.

With the new PLCnext Control AXC F 3152, Phoenix Contact offers a high-performance Axioline control system based on the open PLCnext Technology ecosystem. The new controller is suitable for implementing demanding applications without functional safety requirements.

If a Siemens PLC needs to connect to a PC via Ethernet, the standard approach is to use a PC/communication processor. IBHsoftec offers a more flexible solution: the IBH Link S7++. It's a cost-effective Ethernet-PROFIBUS gateway for programming, drive configuration, PC-to-Siemens PLC communication, and communication between PLCs and FDT applications.

Er-Soft presents the CAN-Bus Tester 2, or CBT2, a measurement, analysis, and diagnostic tool for CAN-Bus and protocols that use CAN-Bus as their physical layer. For a communication concept like CAN (Controller Area Network), we also need a tool that ensures the installation functions optimally.

EPEC controllers are ideal for controlling machinery in extreme environments, such as agricultural machinery, construction equipment, port cranes, heavy vehicles, and anywhere conditions are extreme and special protection is needed against high and low temperatures, rain and snow, dust, impacts, etc

Würth Elektronik expands its range of LAN transformers with the WE-LAN ​​AQ. This LAN transformer is characterized by excellent electrical properties that can be reproduced in series applications.

Phoenix Contact's TC extenders not only extend simple point-to-point Ethernet runs with plug-and-play functionality, but also allow for easy remote monitoring of all extender runs and participants via IP using a single managed device.

Advantech introduces the latest addition to its ARK-1000 series: the ARK-1220, a DIN rail-mounted embedded PC box without forced ventilation for industrial and/or outdoor applications. The ARK-1220 features Intel Atom® E3940 QC processors with front-accessible I/O ports in a single bezel, making it suitable for machine automation, smart factories, equipment integration in cabinets, and IoT gateways.

Perle Systems has announced the availability of DIN rail connection panels.

The PLCnext Control RFC 4072S control system from Phoenix Contact is the first high-performance control system for the PLCnext Technology ecosystem.

RS Components (RS), a trading brand of Electrocomponents plc, has announced the availability of the HARTING ix Industrial® range of Ethernet interfaces. These new devices set a higher standard for Ethernet interfaces and address the future challenges posed by Industry 4.0 and the IoT (Internet of Things).

PLC-ANALYZER pro 6, the new version of the software from the German company AUTEM to optimize the applications executed by PLCs and Automata in performance and control quality.

PLC-ANALYZER pro is software for logical, execution time and quality analysis, by recording measured values ​​in PLC-controlled installations.

The standard in the water management sector, recognized by BSI since August 2017, outlines the latest technology required for the protection of critical infrastructure. Phoenix Contact offers a wide range of communication solutions for numerous sectors and applications that comply with this standard.

The RTU32's IEC-61850 standard has been certified by KEMA in the Netherlands. In fact, the entire certification process was completed in just 5 days, a new KEMA record. Never before has an IEC-61850 driver stack been certified so quickly. The RTU32 offers KEMA-approved IEC-60870 and IEC-61850 versions and is distributed in Spain by Er-Soft.

Machine designers can use a new programmable logic microcontroller (PLC) to help optimize the control architecture in large machines or autonomous systems. The new Allen-Bradley Micro870 PLC can support intelligent micro-applications requiring up to 304 I/O points, 280 KB of memory, and 20,000 program instructions.

Allen-Bradley's GuardLogix 5580 and Compact GuardLogix 5380 controllers can scale from SIL 2/PLd to SIL 3/PLe safety system levels. This adaptability can help engineers optimize safety system design and potentially reduce costs while meeting the latest machine safety standards.

DAVANTEL announces the launch by its partner Kyland Technology of the KWG3000 family of Modbus gateways with 1, 2, or 4 serial ports in a DIN rail mounting format.
The KGW3101, KGW3102, and KGW3204 gateways allow conversion between Modbus TCP and Modbus RTU/ASCII protocols.

The CAN-CR200 repeater offers galvanic isolation and is compatible with all CAN-based networks, such as CAN, CANOpen, DeviceNet, J1939, NMEA2000, ISOBUS, and more.
The CAN-CR200 allows for the creation of star and/or tree topology networks.
A special feature of the repeater is its automatic detection and isolation of faulty segments from the rest of the network, allowing the remaining network to continue operating. After the fault is resolved, the affected segment is reconnected to the network.

Moxa launches the EDS-P506E-4PoE series of PoE switches that can deliver up to 60 watts per PoE port for converged data and power transmission. The power output is designed for IP cameras with power-intensive features such as PTZ, lighting, heaters, and fans in demanding environments.