Telecommunications, Fiber Optics and Networks Magazine
Current professional news on connectivity, fiber optics, FTTH, networks, data centers and electronics.
Contact
- Details
- Category: Contact
In accordance with the provisions of Organic Law 15/1999 of December 13, on the Protection of Personal Data, we inform you that your data will be included in an automated file owned by CONECTRONICA, and may be used for the following purposes in each specific case:
Submitting your personal data through this website to request information or a quote implies your consent to the inclusion and processing of your data in the CLIENTS file, registered by this company with the Spanish Data Protection Agency (AEPD). The data obtained will be used to process your request.
The information you provide may also be used to send you information about our products and services. If you do not wish to receive this type of information from our company, simply inform GM2 PUBLICACIONES TÉCNICAS, SL, located at C/ Poema sinfónico, 27, escalera B, 1-5, 28054, Madrid.
SUBMISSION OF CVs: Submitting your CV through this website implies your consent to the inclusion and processing of your data in the CVs file, registered by this company with the Spanish Data Protection Agency (AEPD). The data obtained from your CV may be used for personnel selection purposes for potential employment with this company.
To facilitate access to the content offered through the website.
To study the use of services by users and visitors.
CONECTRONICA will not transfer information to third parties without the prior consent of users, except in the cases regulated in Articles 11 and 12 of the LOPD (Spanish Data Protection Law): When the transfer is authorized by law; When it involves data collected from publicly accessible sources; When the transfer is to be made to the Ombudsman, the Public Prosecutor's Office, the Courts, or the Court of Auditors, in the exercise of their assigned functions; When the transfer is to be made to regional institutions with functions analogous to the Ombudsman or the Court of Auditors; If the communication is made after a de-identification procedure.
In the event that personal data is requested from the user by means other than those described above, CONECTRONICA will expressly and unequivocally inform them of the conditions under which personal data is collected and the purposes for which it will be used, the obligation to provide it or not, the rights that the user has, the conditions under which they can be exercised, the recipients of the information, the data controller and any other supplementary information that may be necessary.
You may exercise your right of access, rectification, cancellation and opposition to the processing of your personal data, under the terms and conditions provided for in the LOPD, by writing to GM2 PUBLICACIONES TÉCNICAS, SL, with address at C/ Poema sinfónico, 27, escalera B, 1-5 28054, MADRID.
Failure to provide the personal data that is required in the contact form may result in CONECTRONICA being unable to process your request.
Likewise, by accepting this legal notice, you acknowledge that the information and personal data collected are accurate and truthful.
We also inform you that CONECTRONICA has implemented the necessary technical and organizational measures to guarantee the security of your personal data and prevent its alteration, loss, and unauthorized processing and/or access, taking into account the state of technology, the nature of the stored data, and the risks arising from human action or the physical and natural environment to which it is exposed. All of this is in accordance with the provisions of Article 9 of Organic Law 15/1999 on the Protection of Personal Data and Royal Decree 1720/2007 of December 21, which implements said Law.
CONECTRONICA undertakes to treat your personal data with absolute confidentiality and to use it only for the purposes indicated.
- Details
- Category: Contact
The domain www.conectronica.com is owned by GM2 PUBLICACIONES TÉCNICAS, SL (hereinafter, CONECTRONICA), a company registered in the Mercantile Registry of Madrid, T 25596 , F 151, S 8, HM 140288, I/A 7, with registered office at C/ Poema Sinfónico, 27 staircase B, 1-5, 28054 Madrid and Tax Identification Code B81022758
GM2 Publicaciones Técnicas, SL: is a company dedicated to the publication of technical journals. CONECTRONICA is a publication of GM2 Publicaciones Técnicas, SL.
GENERAL TERMS OF USE OF THE WEBSITE
The use of this website, as well as its subdomains and/or directories (hereinafter collectively referred to as the "Portal"), is subject to these General Terms of Use, as well as any specific terms and conditions (hereinafter, the "Specific Terms") that may govern the use of certain services offered therein. Therefore, before using these services, the User must carefully read both this Legal Notice and, where applicable, the corresponding Specific Terms. Furthermore, the use of the Portal is also subject to all notices, rules of use, and instructions provided to the User by CONECTRONICA that replace, supplement, and/or modify these General Terms of Use. By simply using the Portal or any of the portals included on the website, the User expresses their unreserved acceptance of these General Terms of Use.
Therefore, if you do not agree with the considerations detailed in this Legal Notice, please do not use the Portal, as any use you make of it or the services and content therein will imply acceptance of the legal terms contained in this text.
CONECTRONICA reserves the right to make changes to the Portal without prior notice in order to update, correct, modify, add to, or remove Portal content or design elements. The Portal's content and services are updated periodically. Because information updates are not immediate, we suggest you always verify the validity and accuracy of the information, services, and content found on the Portal. Likewise, the terms and conditions contained in this Legal Notice may change, so we encourage you to review these terms each time you visit the Portal.
User Condition and Responsibilities
Use of the Portal confers the status of Portal User (hereinafter, the "User") and implies full and unreserved acceptance of each and every one of the provisions included in both this Legal Notice and the Privacy Policy.
The User agrees to use the Portal Services in accordance with the terms expressed in this Legal Notice and is responsible for their proper use. Without prejudice to the foregoing, the User agrees not to use the Portal for the provision of services, advertising, or commercial exploitation.
Some of the services offered may require prior registration of the User, for whose use you must register as a User of the CONECTRONICA website, and for this you must read and expressly accept -at the time prior to registering for the service- the registration conditions and the Privacy Policy.
All information provided by the User must be truthful. To this end, the User guarantees the authenticity of all data provided when completing the forms required for registration and access to certain services. The User is also responsible for keeping all information provided to CONECTRONICA permanently updated so that it reflects the User's current situation at all times. In any case, the User will be solely responsible for any false or inaccurate statements made and for any damages caused to CONECTRONICA or third parties as a result of the information provided.
CONECTRONICA does not endorse or assume responsibility for the use or content that may be entered, sent, and/or viewed through any messaging, publishing, or communication systems of any kind (instant or otherwise) that the Portal may offer its Users. None of the information and/or content that may be entered, sent, and/or viewed through these tools shall be considered CONECTRONICA content, and therefore CONECTRONICA shall have no responsibility for them. However, CONECTRONICA reserves the right to withdraw access to these tools if it becomes aware of their misuse, which includes the introduction of illegal content or content contrary to morality and public order, these General Terms of Use, or any use that is or may be detrimental to CONECTRONICA's image.
Use of Portal Content
The User agrees not to use the Portal or the services offered on or through it to carry out activities contrary to the law, morality, public order, harmful to the rights and interests of third parties or that in any other way may damage, disable, overload, impair or prevent the normal use of the Portal.
Any User who acts against the image, good name, or reputation of CONECTRONICA, as well as anyone who unlawfully or fraudulently uses the designs, logos, or content of the Portal and/or violates in any way the intellectual and industrial property rights of the Portal or its content and services, will be liable to CONECTRONICA for their actions. For the purposes of this document, "content" shall include, but is not limited to, texts, photographs, graphics, images, icons, technology, software, links, and other audiovisual or sound content, as well as its graphic design and source code. In particular, the User agrees to refrain from:
(a) reproduce, copy, distribute, make available or otherwise publicly communicate, transform or modify the Content, unless authorized by the holder of the corresponding rights or legally permitted;
(b) to remove, manipulate or in any way alter the copyright and other identifying information regarding the reservation of rights of CONECTRONICA or its owners.
Intellectual property and industrial property rights.
Both the design of the Portal and its source code, as well as the logos, trademarks, and other distinctive signs appearing on it, belong to CONECTRONICA or collaborating entities and are protected by the corresponding intellectual and industrial property rights. Likewise, the content offered on the Portal or available through the CONECTRONICA server is protected by the corresponding intellectual and industrial property rights. Under no circumstances may the use of or access to the Portal and/or the services and content offered therein be construed as granting the User any rights whatsoever over the aforementioned trademarks, trade names, and/or distinctive signs.
Its use, reproduction, distribution, public communication, transformation, or any other similar activity is strictly prohibited unless expressly authorized in writing by CONECTRONICA. The license granted to the user for any content on this Portal is limited to private use, provided that said content remains unaltered, and the user agrees not to use the content for any purpose other than that expressly permitted herein.
CONECTRONICA declares its respect for the intellectual and industrial property rights of third parties; therefore, if you believe that this site may be violating your rights, please contact CONECTRONICA at the following email address:
Links or hyperlinks
CONECTRONICA provides you with access to other websites that we believe may be of interest to you. The purpose of these links is solely to facilitate your search for resources that may be of interest to you on the Internet. However, these websites do not belong to CONECTRONICA, nor is their content reviewed. Therefore, CONECTRONICA cannot be held responsible for these websites, their operation, or any damages that may arise from accessing or using them.
No website or email address may be linked to the Portal without the express written authorization of CONECTRONICA. Furthermore, any such links must comply with the following conditions: (a) links may only be made to the Home Page of this website; (b) the establishment of the link does not imply any agreement, contract, sponsorship, or endorsement by CONECTRONICA of the linking website, unless expressly stated in a contractual relationship between the parties.
At any time, CONECTRONICA may withdraw the authorization mentioned in the preceding paragraph, without having to state any reason. In such case, the website that created the link must remove it immediately upon receiving notification of the revocation of the authorization from CONECTRONICA.
CONECTRONICA's Responsibilities
Improper Use of the Portal: CONECTRONICA has created the Portal to promote its activities and facilitate access to its services, but it cannot control its use in any way other than as stipulated in this Legal Notice. Therefore, access to the Portal and the proper use of the information contained therein are the sole responsibility of the user. CONECTRONICA is not liable for any improper, unlawful, or negligent use of the Portal by the user, nor for any unauthorized third parties gaining knowledge of the type, conditions, characteristics, and circumstances of the user's use of the Portal and its services. Furthermore, CONECTRONICA will not be liable for any damages of any kind that may arise from a user impersonating a third party in any communication conducted through the Portal.
Use of content: CONECTRONICA provides all the content on its Portal in good faith and will make its best efforts to ensure that it is always up-to-date and current; however, CONECTRONICA cannot assume any responsibility for the use or access made by Users outside the scope for which the Portal is intended, the final responsibility for which will fall on the User.
Viruses: CONECTRONICA undertakes to implement all necessary measures to try to guarantee the User the absence of viruses, worms, Trojan horses, and similar elements on its Portal. However, these measures are not infallible, and therefore, CONECTRONICA cannot fully guarantee the absence of such harmful elements. Consequently, CONECTRONICA will not be liable for any damages that these elements may cause to the User.
Technological failures: CONECTRONICA has concluded all the necessary contracts for the continuity of its Portal and will make its best efforts to ensure that it does not suffer interruptions, but it cannot guarantee the absence of technological failures, nor the permanent availability of the Portal and the services contained therein and, consequently, assumes no responsibility for the damages that may be generated by the lack of availability and by the failures in access caused by disconnections, breakdowns, overloads or network outages not attributable to CONECTRONICA.
Applicable Law and Jurisdiction
The applicable law in the event of a dispute or conflict regarding the interpretation of the terms of this Legal Notice, as well as any matter related to the services of this Portal, shall be Spanish law. For the resolution of any conflict that may arise from visiting the Portal or using the services offered therein, CONECTRONICA and the User agree to submit to the jurisdiction of the Courts of the User's domicile, provided that the User's domicile is located in Spanish territory.
Duration and Termination.
The provision of the Portal service and the other services offered therein is, in principle, for an indefinite period. CONECTRONICA may, however, terminate or suspend the provision of the Portal service and/or any of the services at any time, without prejudice to any provisions to the contrary in the corresponding Specific Conditions. To this end, CONECTRONICA will communicate this circumstance on the service access screen with fifteen (15) days' prior notice.
CONECTRONICA also reserves the right to unilaterally modify, at any time and without prior notice, the presentation and conditions of the Portal, as well as its services and the conditions required for its use.
Subcategories
News: Fiber Optic Instrumentation and FTTH
Signal Fire AI-12: Fiber optic splicer with core alignment and six motors
Signal Fire Technology expands its range of equipment for network installation and maintenance...
Fujikura 100R fusion splicer: innovation in fiber optics for high-density data centers
The new "100R" mass fusion splicer is capable of splicing from a single optical fiber...
SFS-2000H fiber optic fusion splicer with 6 motors for high-precision splicing
The Saluki SFS-2000H fusion splicer is the new fusion splicing equipment from Saluki Technology Inc.
Fitel S179A-21 Fusion Splicer, superior precision and advanced performance for fiber optic installations
Furukawa Electric, through its FITEL brand, announces the launch of the fiber optic fusion splicer...
Sumitomo T-56+ Core Alignment Fusion Machine
Sumitomo Electric announces the availability of its automatic core alignment fusion splicer...
Fujikura 100S Fiber Optic Fusion Splicer with Dual Fiber Preparation System
Fujikura, a global leader in fiber optic solutions, announces the availability of the new...
Data Centers
Vertiv SmartIT, a modular infrastructure for high-density AI data centers
Vertiv Holdings Co. has introduced the Vertiv™ SmartIT solution, a pre-engineered architecture...
Submer Group creates Corenix to develop modular data centers for AI
Submer Group has announced the creation of Corenix, a company specializing in design and...
Data centers and AI are betting on SMRs: the nuclear energy driving the digital future
The energy demand of data centers, which is growing rapidly driven by the boom in...
Implementation of modular UPS systems: scalability, redundancy and efficiency with the Salicru SLC ADAPT2
The most basic starting point would be a cabinet containing a monolithic UPS. However,...
PSM integration for enhanced module solutions in 48V data centers
In modern data center power architectures, a power room solution...
Vertiv OneCore: hybrid prefabricated data center for AI, HPC and cloud
The growing demand for infrastructure for artificial intelligence, high-performance computing...
Video - IP
EET incorporates the AXIS D2124-VE radar with AI and 360-degree coverage for perimeter security
EET has added the AXIS D2124-VE to its catalog, an Axis Communications radar designed for...
NEXCOM NViS 6712 combines NVR storage and AI acceleration
NEXCOM has introduced the NViS 6712, a 2U NVR hardware platform designed for...
EET incorporates Ubiquiti's UniFi Protect 7.1 to improve video security
EET, an official Ubiquiti distributor, incorporates Ubiquiti's UniFi Protect 7.1, a new version...
D-Link returns to enterprise video surveillance with IP cameras and NVRs
D-Link has announced its return to the enterprise video surveillance sector with the launch of...
Concept International presents the Giada D108, an industrial PC with edge AI and support for four 4K displays
Concept International Spain has announced the launch of the Giada D108 in the Spanish market, a...
Reolink Solar Floodlight: 2K security camera with solar panel and smart light
Reolink has announced the launch of the Solar Floodlight camera, available from Reolink and...
Photonics
Avicena LightBundle achieves 1 Tb/s with microLED optical interconnects
Avicenna has begun supplying customers and partners with its LightBundle assessment kits...
ams OSRAM develops 850 nm microVCSEL for AI optical interconnects
ams OSRAM has developed an 850 nm thin-film VCSEL platform intended for...
Vision & Control presents photonics solutions for industrial vision at VISION 2026
At VISION 2026 in Stuttgart, Vision & Control will present its latest "solutions based on...".
Vector Photonics drives the encapsulation of PCSEL lasers
Vector Photonics, a pioneer in the use of photonic crystal surface emission lasers (PCSELs)...
200mm BaTiO₃ wafer powers photonics and AI in data centers
La Luce Cristallina announced today that the beta version of its barium titanate (BaTiO₃) wafer...
Taara Beam revolutionizes connectivity with optical wireless communication of up to 25 Gbps
Taara, a graduate of Google's X, the incubator for innovative projects, announced today a new approach...
Industrial Networks
Portable solution for 100GE to 800GE Ethernet testing in data centers EXFO Hyperblazer
EXFO has introduced the HyperBlazer Series, a new family of portable and modular solutions for...
The rise of PoE in smart industrial environments
As industrial environments rapidly evolve with the integration of operational technology...
Rockwell Automation introduces FactoryTalk Conductor, an AI orchestration platform for industrial automation
Rockwell Automation has announced FactoryTalk Conductor, a new orchestration platform...
Murrelektronik presents a four-port IO-Link multiplier with IP67 protection
Murrelektronik has announced a new IO-Link multiplier designed to expand the number of...
Perle expands IOLAN SCR with 10 and 18 port models and SAML 2.0 authentication
Perle Systems has expanded its IOLAN SCR console server range with two new models, IOLAN...
Belden and Edge2Web present Smart Factory Insights for industrial monitoring
Belden and Edge2Web have introduced Smart Factory Insights, a software solution designed to...
Newsletter
Latest News
UFV students achieve a 187.7 km HaLow Wi-Fi communication in the stratosphere
Nine students from the Higher Polytechnic School of the Francisco de Vitoria University (UFV)...
The ITU updates its guidance on precision time synchronization for critical networks and infrastructure
The International Telecommunication Union (ITU) has published a new edition of its manual...
FWA connections in Asia-Pacific will grow by 12.5% annually until 2031, according to GlobalData
Fixed wireless access (FWA) connections in the Asia-Pacific (APAC) region will register...
PowerON by Sonepar Spain brings together 6,000 professionals and 56 exhibitors in its first edition
PowerON by Sonepar Spain brings together 6,000 professionals and 56 exhibitors in its first edition...
Nokia agrees to sell its Enterprise Campus Edge business to AURELIU
Nokia has signed a definitive agreement for the planned sale of its Enterprise Campus Edge business...
FTTH and FTTx Fiber Optic News
D-Link presents Nuclias Unity for managing enterprise networks from the cloud
D-Link has introduced Nuclias Unity, a cloud platform for centralizing configuration,...
Agentive AI and Network as Code are transforming telecommunications networks
For decades, telecommunications networks have been an exclusive domain: complex,...
FTTH in Europe 2026: Fiber optic growth, adoption and forecasts until 2031
Today, the FTTH Council Europe published the latest edition of the European FTTH/B Market Panorama,...
FTTH digital twin and AI-based tools to increase network reliability
Nokia today announced new software tools and AI models that improve efficiency...
Huber+Suhner Ribbon Solution #huber-suhner-ribbon
HUBER+SUHNER's comprehensive Ribbon solution sets new standards for data center management...
Subscribe to CONECtrónica magazine
You can subscribe to the Conectrónica magazine in 2 formats.
Digital Format: 5 downloadable PDF editions at an annual cost of 60 Euros (VAT included)
Paper Format: 5 editions to be received by mail at an annual cost of 180 Euros (VAT included).
Contact our subscription department at[email protected]
Payment via Bizum or bank transfer
Free Courses
Free basic radiocommunications course
This course, taught by Dr. Francisco Ramos Pascual, will cover all those aspects...
Free Basic Fiber Optic Course
Here are all the fact sheets from the Basic Fiber Optics Course published in the first issues of...
Wireless Networks News
Cambium Networks presents the X7-56X Wi-Fi 7 access point for high-density environments
Cambium Networks has announced a new high-density Wi-Fi 7 access point—the X7-56X—...
Taara launches Link Planner for planning wireless optical networks
Taara has announced the launch of Taara Link Planner, the industry's first product for...
Powering wireless access points: More power, more users, more data, and more speed
Wireless networks are no longer limited to homes, offices, access points...
Televés presents Booster 3, its new smart 5G amplifier
Televés will present its new Booster 3 in early February, a solution designed to optimize...
Avatel launches Conecta Mesh: Stable WiFi and total home coverage
Avatel Telecom announces the launch of Conecta Mesh, its new advanced system for amplifying...
NeoMesh on LoRa® PHY
The debate surrounding wireless mesh networking technologies often focuses on the levels...
Zyxel Networks WiFi7 Access Points
Zyxel Networks announces the launch of six new WiFi7 access points (APs) designed for...
Multigigabit Wi-Fi 7 wireless and wired access and switching solutions
Cambium Networks announces an expansion of its ONE Network solution with the addition of new...
Artificial intelligence and automation are shaping the mobile networks of the future
The telecommunications sector is facing a profound transformation. While networks...
Technical Courses and Seminars
Factory Tomorrow analyzes networks and infrastructure for industrial AI and Industry 4.0
The season consists of three episodes and features Phoenix Contact and Belden....
Mouser drives IoT development with its LoRaWAN resource center and new wireless connectivity solutions
Mouser Electronics, Inc. highlights its comprehensive LoRa® resource center as the market accelerates...
DataCom: Technical guide for networks, fiber optics and structured cabling
Digital transformation has turned data networks into a critical infrastructure for...
Taoglas launches The Antenna Podcast, a new technical space about antenna design and innovation
Antennas remain one of the most critical and, at the same time, most misunderstood elements in...
ISE 2026 Barcelona: Summits, Megatrends and the most ambitious content program in the AV sector
Returning to Barcelona in February 2026, Integrated Systems Europe (ISE) presents its program of...
Racks and Enclosures News
Sacen develops CO2Free, an autonomous cabin for communications and monitoring in remote areas
Basque engineering firm Sacen has developed CO2Free, an autonomous cabin designed for the deployment of...
Panduit launches the ES2P managed PDU for smart energy distribution
Panduit announces the launch of the ES2P power distribution unit, a managed PDU...
Vertiv introduces Rack Extreme, the new high-density rack for AI and high-performance computing
Vertiv has announced Vertiv™ Rack Extreme, a next-generation rack designed to meet...
Battery support for OCS and POS boxes
The new OCS Bat Hold drum stand from Phoenix Contact is specially designed for...
Rack PDUs in High-Density Applications for AI and HPC Deployments
Vertiv today announced the new Vertiv™ Rack Power Distribution Units (rPDUs)...
Panduit EL2P™ PDU
Panduit introduces the EL2P™ PDU, the latest evolution in intelligent power distribution for...
Famatel STONE Series wall cabinets #outdoor-cabinet
Famatel's STONE Series of polyester wall-mounted cabinets is designed to withstand...
Integrated enclosures for Taoglas Thunder antennas #antenna-enclosure
Taoglas® has launched its new Thunder series, a platform of enclosures for high-performance outdoor antennas...
